Heinz

can you provide more information about this the type of light the settings of your Scene. I have a Blu Motion around the house and i set a delay on the first trigger. I did this so that i dont double trigger the sensor.

Allgemeine Informationen zu einigen der Pro-Geräte Hier ist ein Video, das dir einen besseren Einblick in einige Geräte der Pro-Serie gibt. Sieh es dir an und teile deine Meinung.

very true would only make sense to have more bandwidth and POE if the devices require it

No problem maybe there are other options such as Home assistant, this could be something to look into. As good as Facebook is the information can be flooded and not structured. In time there will be more activity here. Feel free to post more questions or use cases that might interest you

looks perfect to me.

That device is already a dimmer. it is recommended to use a button, double button, or a Rocker button type switch. Here you can then use the feature if it's a button for short, and long push.

From the looks of it seems fine to me: The Main switch is a double pole Isolator breaker. From what I know it is just an on-off switch for both Phase and Neutral. This then goes into the RCB Switch that provides power to the remaining breakers. How each component works I am not sure I'm sure we have a Electrition on the forum that might shine light on this question I found this PDF of the Isolation switch you might have https://assets.legrand.com/pim/NP-FT-GT/F01677EN-00.pdf

did you manage to open the device and check the solder points ?

That's an exciting way to install it. I like the fact its super hidden.

did it work for you ?

all good at least the solution was found

Nice at least you managed to figure it out just for others who might have the same issue it can be found in the device settings see the attached picture. This would go for many applications not just for the Roller shutters.

Hi @N20net We are currently reviving the forum in the next few weeks we will see more activity here. What H&T Device are you using ? As the H&T Gen3, H&T Plus, or Blu H&T? The H&T Plus and Gen3 can be shared to another shelly account with the share option. On another note you can also share the device that's linked to the heading to the account so that they could change the input state of the heating.

Maybe it was the translation but i am not 100% sure what your goal is. you I would not use a action but rather a scene. From here you will be able to select the individual channels. maybe some more information would be helpful to come up with a solution. Do you have existing temp sensors ?

Thanks for the explanation will help for future if you want please post a picture of the end result would be cool to see a real work example

As I don't know much about 3D printers how they work and what the device does maybe @Olsche could check and confirm some finer details he know more about 3D printers than I do If you have the whole printer power running from the Shelly to the 3D printer this will then give you a full overview and on/off capability of the 3D device. it's the one cable I am not sure is needed. does the motor also draw power from the PSU, heating bed rail?

The forum was quite inactive for a while how ever there is an initiative to revive it. We should in the next few weeks see more activity on the forum 🙂

This is above my knowledge at the moment. Interesting use case I'm sure someone here might have more information about how to do it

I have a question here about the script. do you still want to use the push button to send the commands to the device? Im not super great in scripting yet but should be ok to try it out myself. Just need to know if you want to have this offline and what push button you are using? This would help me to make a simular use case to yours

Hi @André We are in the process of upgrading the forum and have a section for scripting. I moved this topic to the Scripting section of the forum. Clubs are groups where everyone can contribute to a certain topic or subject.

Snap @Olsche you sent the reply before me 😄

This looks more like how the wiring would be for the Pro 1PM and as well as the switch option looks good. My only question is does the 3D printer need two power inputs? Do you want to monitor the 3D printer and be able to turn it off and on? Then you would only need the power going to the 3D printer from the output of the Shelly and not another connection from the wago.

If you don't find it on the forum, subscribe to the Shelly YouTube channel to get the latest videos. Also, make sure you click the bell icon to get the notification of a new video. You can also find the YouTube and Facebook links at the bottom of the forum. SHELLY YOUTUBE CHANNEL ___________________________________________________________________________________________________________________________________________ Wenn du sie nicht im Forum findest, abonniere den Shelly YouTube-Kanal, um die neuesten Videos zu erhalten. Außerdem solltest du auf das Glockensymbol klicken, um eine Benachrichtigung über ein neues Video zu erhalten. Den Youtube- und Facebook-Link findest du auch am Ende des Forums.

The Blu H&T is only for Temp and Humidity. If you want to have it as a motion detector then the blu motion is the best bet. If you want to use it outside there is a risk as its not suitable for outside use. it would need to be well protected if it is outside.