Olsche

Have you tried it with a 2nd scene with the condition that if 1PM Mini measures less than 5W, 1 Mini should switch off?

Have you made any settings here?: Otherwise, see here in the knowledge base there is an overview of the LED indication: https://kb.shelly.cloud/knowledge-base/shelly-plus-plug-s-v2

What isn't working? Have you measured whether A (brown) is really live?

Your description of how you want to connect it seems okay, make sure that A is really live (phase) and the blue wire is really neutral. Ideally check with a 2-pole voltage tester. You can also find the connection diagram here: https://kb.shelly.cloud/knowledge-base/shelly-plus-2pm

It will not be possible, the device must sleep regularly so that the measured values are not distorted, also when operated with a USB cable More info about Wakeup Schemes you will find here: https://support.shelly.cloud/en/support/solutions/articles/103000226308-wake-up-schemes-and-reports-of-shelly-plus-h-t The BLU H&T may be the solution, as the values are updated and advertised much more often

Can you provide a screenshot of the settings? I tested the following, it seems to work:

Click on this green marked field: then "Protections" and here it is...

POE would only make sense if the Pro-Series can also be supplied with power via POE. It would also reduce the amount of wiring. I like the idea 😉

Please leave a feature request using the device and feature request form below: https://allterco.freshdesk.com/en/support/tickets/new?ticket_form=devices_and_features_proposals_***_(use_this_form_for_proposing_your_ideas_only) The more of these inquiries received, the higher the likelihood that the customer's wishes will be implemented - if it is technically possible. It will not be possible, the device must sleep regularly so that the measured values are not distorted, also when operated with a USB cable More info about Wakeup Schemes you will find here: https://support.shelly.cloud/en/support/solutions/articles/103000226308-wake-up-schemes-and-reports-of-shelly-plus-h-t

router mal bitte neustarten

werden die URLs aber normal ausgeführt wenn über die Adresszeile des Browsers eingegeben? bitte teile uns mal die Ausgabe von http://IPdesShellUni/settings/actions

No Bluetooth is only intended for App integration with the H&T Gen3, Bluetooth is not available for other functions with the current firmware

wie sehen deine Webhooks genau aus? https wird z.b. nicht unterstützt beim Uni (Gen1)

is a very low temperature value when idle. What does it look like when the relay is switched on and there is the 3kW load?

ja, der kleine grüne (oder rote) Strich ist der Indikator dass der Hardware-Schalter an oder Ausgeschalten ist. Die gezeigte Action ist das was du benötigst...

try with: http://ip_from_your_plus1pm/rpc/Schedule.Update?id=1&enable=true for schedule = on and: http://ip_from_your_plus1pm/rpc/Schedule.Update?id=1&enable=false for schedule=off Id= Schedule-ID - 1 for the first....

A BLU H&T is recommended as an external temperature sensor. An exclusive integration option has been created in the firmware. Advantages: -If BLU H&T as ext. Sensor active, the internal sensor is deactivated -The position for the external sensor can be freely selected; temperature interference (mounting on the outside wall, sunlight) can be avoided here Disadvantage: -BLU H&T is battery-operated, but there are also warnings on the display if the battery is low or the BLU H&T no longer sends signals because it is out of reception range.

Wenn ich dich richtig verstanden habe sollte das was du suchst unter den Actions Schaltfläche an (oder aus) zu finden sein:

You're right, it seems to be a bug. I just reported the issue...

@shinui Basically a question: What do you plan to switch or monitor? What do you think a Pro1PM can do better than a simple Plus Plug S, which is connected Plug&Play at this point? 🤔

@Dimitar Because of Zendure and the cooperation with Shelly. Are there already tutorials or experience reports about the interaction with zendure, especially the battery storage and the possibility of zero feed-in. I'm also very interested, but unfortunately I haven't had the opportunity to gain experience yet 🙂

Home -> Klick on OUTPUT-Bar above where also the button is -> Input/Output-Settings:

Normally this setting should be the right one for your use case. If you turn off the dimmer in the app, the switch must of course first be turned off and then turned on again

Excerpt from the operating instructions: https://kb.shelly.cloud/__attachments/391315459/Shelly BLU Motion multilingual printed user and safety guide.pdf?inst-v=e71125bd-0549-4bac-8110-6b1e8a4e31e3

Which manufacturer and type of light bulb is used?