Olsche

It is not possible to make the settings via API

Your WiFi Supports 2.4GHz?

Check router settings whether firewall or other settings prevent access. double check wifi access data

Welcome! maybe similar Problem like this?

Are there any settings in the Frizbox that prevent a connection? Are there entries in the event log that log failed connection attempts? Setting in the Fritzbox:

The integration problems may be due to the limitations of the router. Which router model is it, are there firewall settings that prevent a connection. Guest access?

you need to create a scene for this: Example:

is the shelly registered in the WLAN and assigned an IP? This can be checked in the router or in the WiFi connection settings of the Shelly in the web UI when connected to the AP. If an IP is visible: enter it in the app when adding via IP and try integrating

in the address bar of the smartphone browser when connected to the Shelly's access point

Please try the following: -Reset Shelly Plus 1PM to factory settings (press the device button on the back for at least 10s) -Connect to the device via the access point provided (via the IP 192.168.33.1) -Enter the WLAN access data in the WLAN settings Does the Shelly Plus 1 now connect to the WiFi network? You can check this in the router

Hello @Frank the community language is English. It would be helpful if you showed us a few pictures/screenshots and error messages that arose when the integration attempt was unsuccessful. Which WiFi network are you using (2.4GHz required) and what is the procedure for attempting to integrate it?

Here is an example scene that can also be created at control.shelly.cloud or in the app: Example of notification Pump on channel X is on. Try it out, you can link the conditions with AND and OR as you like and also set active times for the scene individually. Here you can test the scene you created and check whether you receive a notification:

It's easy to create a scene with the action of sending a notification to your smartphone or email when the status changes to ON (or Off).

Exactly, there is no direct cabling between the two Shellys necessary, only a stable WLAN and/or Internet connection is required. The scenes and also the actions can be easily programmed/created via the app. You can also use a Shelly Plus 1 for this or if powermetering is desired: Plus 1PM

Welcome, your project can easily be done using a scene or actions (preferred). As soon as the output of your Shelly 1 for the gate is active, another Shelly (Plus1 as an example) can be addressed via scenes or actions, which is connected to the lighting for the gate entrance and can it switched on for 15 minutes with an auto-off timer

Try this: 1. Remove the battery from the BLU button. 2. Remove the Bluetooth BLU button from the saved pairing setting on your phone, if available. 3. Restart the mobile phone 4. Launch the Shelly Blue Debug app:https://apps.apple.com/us/app/shelly-ble-debug/id6449539118 5. Press the button on the BLU button and insert the battery while holding the button. 6. Now press the button on the BLU button, the BLE Debug app should confirm this in the log display. 7. In the BLE Debug app, click OTA. Now the OTA counter should show 0-100% and the update should be successful.

You can do it in the WEB UI, enter the actual IP automatically assigned by DHCP into the address line of the browser, then under Settings -> WiFi can be switched to static IP

So far nothing is known about the development of such a device. But you can create a ticket with Device Proposal at any time https://support.shelly.cloud/en/support/tickets/new?ticket_form=devices_and_features_proposals_***_(use_this_form_for_proposing_your_ideas_only)

the blue cables on O1-O4 are also neutral cables? That would be completely wrong wired. O1-O4 are the outputs to the consumer, S1-S4 are the external hardware switches that can be connected if available check also here: https://kb.shelly.cloud/knowledge-base/shelly-pro-4pm

What are all the blue wires connected to O1-O4 and the brown wires to S1-S4?A sketch of the wiring would be helpful

Which firmware is installed on the PlusPlugS? Normally there should be more options available in the Bluetooth menu: Check also WEB-UI:

Have you assigned a gateway to the BLU Button1? You can set in the edit menu in the App:

The control button on the BLU DoorWindow is also very easily accessible from the outside.

Try this please: 1. Remove the battery from the BLU-Button. 2. Remove the BLU-Button from the saved pairing setting in the phone, (if available.) 3. Restart the mobile phone 4. Launch the Shelly BLE Debug app 5. Press the button on the BLU-Button and insert the battery while holding the button. 6. Now press the button on the BLU-Button, the BLE Debug app should confirm this in the log display. 7. Click OTA in the BLE Debug app. Now the OTA counter should show 0-100% and the update should be successful.

No abnormalities with increased battery consumption with my 3 BLE devices 1x BLU Button1 and 2x BLU DW are currently at 100% despite daily use - all with last OTA-Update 1x BLU DW in continuous beacon mode since the debug app was released - without any significant battery consumption. BLU-Button1: What is remarkable, however, is a reduction in battery voltage during stressful testing (reduces to 70%), if you allow it a long break of several hours, the charge indicators go back to 100%