Heinz

Posts dont need to be in English. einfach drauf los schreiben 🙂

I understand that the translation isn't perfect, and there's a plan to improve it. The goal is to enable people worldwide to assist each other. Since Germany is a significant part of the Shelly community, there are many German native speakers here, so communication regarding your questions shouldn't be an issue. Regarding the smart home forum, yes, it still exists, but it is an enthusiast forum. Similar to the smart home forum, this forum is community-based, and we're all here to support one another. Having direct contact with Shelly staff is also beneficial.

Hi @-SVenja- Yes this is the Shelly forum " The Manufacturer" we are a community and help each other. Yes we can assist with all issues with in the forum but when its needed a ticket can still be opened on the main Shelly.com website. T for the translation, you can find all the information here Translations are based on the forum posts as well as individual forum posts

you could enable the Shelly plus Plug S in Range extension mode and then have the Shelly plug 2 connect to the Plug S via wifi

im not sure never tried I activate scenes with devices when the input state changed. I did this with a i4

Well yes you can. just keep in mind that you would remove the Dim up function. but yes you can create a scene to send the command to the Pro 4 to turn on or via a webhook it will just be a matter of setting the rules

So you want to if Dmmer2 SW2 is triggered to turn on the Shelly Pro 4 ?

nice sometimes its just a update that is needed 🙂

@JGeertsenjust a question here have you changed the setting to cover move? this will then show as one device and show the up and down arrow. If you moving it to cover mode also make sure to do the calibration as well

I think here you might need to open a ticket from the Shelly.com website there might be something else network-wise that might be blocking the cloud connection seeing that you need to use a VPN to open the app and establish a connection

awsome thanks for the update

hmm I'm not sure what temp sensor can reach that and be compatible with the Shelly addon. My best bet is to check on some Arduino sites to see what other sensors are there I saw there was some talk about a pt100 sensor or a k-type thermocouple but this is going to be a test that needs to take place to see if it works with the Shelly addon.

Hi @Gluexxkind There could be several issues here. The device might have been assigned a static IP address, preventing it from connecting. The main goal is to attempt to connect to the Shelly 2PM over Wi-Fi. If the device does not have a static IP address try turning off the device from the distribution box and then turning it back on to reconnect the device to the router. I have a few questions to ensure we are on the same page: Can you provide the MacID or Device ID of the 2PM that's offline? Can you connect to the device via its IP address? Is the device appearing on the Fritzbox? You can try to get the device back online by setting up a temporary Shelly SSID from another Shelly device by enabling the Range Extender. This should allow you to connect to the device's IP via the shared network from Shelly. As a last resort, if the device is still not connecting, you may need to reset it. To do this, turn off the power at the main breaker, go to the Shelly 2PM switch, and turn it off and on five times quickly. You should hear it click five times rapidly. After this, you can include it in the app again via the SSID.

Hi @nabil when you added the device to the network did you also enable the cloud option. do you have the device configured and showing online on the Phone app or are you connecting to the device via web browser

Von hier aus würde ich kombinierte Szenen erstellen. Ich würde die Regel hinzufügen, dass die Szenen deaktiviert oder ausgeschaltet werden, wenn das Wasser im Pool eine Temperatur von X hat, und dann eine zweite, dass die Szenen aktiviert oder eingeschaltet werden, wenn das Wasser eine Temperatur von Y erreicht. Dies sind Bedingungen, die Sie hinzufügen müssen, um sicherzustellen, dass alle Szenen in Verbindung miteinander funktionieren. Die Art und Weise, wie ich es tue, ist eine Reihe von wenn dies, dann

Hi @leki73 you can create a scene. Add the device and the condition. when that is done you can set the do function to trigger a alert of other device. So here you can say when Shelly plus S ( solar ) = more than X amount then Do trigger shelly plug S Heater to turn on also make sure that you set a other scene that when Shelly Plug S ( Solar ) = less then X amount then Do trigger Shelly plug S heater to turn off Other wise you only create one condition to turn on but never turn off so this is why you need two scenes Hope this gives you a better idea

Shelly devices are primarily Wifi. The Bluetooth option only supported for the initial setup and inclusion process

The link does not work 🙂

This can be done with a scene you can set a power consumption condition and then an action after that to set a notification

For this i would use a Shelly 1 as it is a Potential free contact relay have a look at the wire diagram for more information https://kb.shelly.cloud/knowledge-base/shelly-1-gen3 if you have questions after looking at the wiring diagram I'm sure we can guide you here

This should be fine. I would take the dimmer on the main circuit to the light to dim. To keep the function of the 2 way switch I would install a Shelly mini to send a webhook to the Dimmer to turn on and off. this way you would still have the two-way switch function and be able to dim the lights from the app. There are also other methods you could use to control the lights to dim from the light switch depending on he switch you have

With this being a built-in dimmer, the Shelly Dimmer would not work in conjunction with the device. If you would want to use the shelly Dimmer it would need to be the main device in this case I'm not familiar with this built-in dimmer module

Leider ist das Addon nur auf Beiträge anwendbar. Wie Theresa bereits erwähnte, gibt es für die Übersetzung einer ganzen Seite Plugins auf Browser-Ebene, die effektiv funktionieren. Einige gute Optionen sind das DeepL Plugin oder das Google Translate Plugin.

Glad it worked and you managed to solve it.

So you managed to solve the problem ?