Heinz

When you are in Germany have a look on the website there is an Installer finder on the site. You should then be able to find an approved installer in your location. https://www.shelly.com/de/installateur/installateursuche

To do this create a scene. you will be able to add multiple devices into the scene and then select what button on the i4 does what hope that points you into the right direction

would be interesting to see if this is possible. I have a feeling this might not be possible but I could be wrong

I will move this to feature request 🙂

This is strange what type of Light bulbs do you have?

I never tried this but a scene might be the solution here. You could use the Shelly Blu motion and set the rule when motion is detected to set it to 100% and then when no motion is detected return to 5% this might be two scenes that would need to be created. I did a test with a motion and a Shelly Bulb I did this with no timer and only with Motion detection and no motion detection

Hi @Oliver Linden From what I know the device sends a status check every 11 seconds. It then updates the log when a change is found. See the below example. This device does not have a beacon mode like the other devices.

Es ist schwer zu sagen, was wann auf den Markt kommen wird, da es immer viele Faktoren gibt. Das Team arbeitet sehr hart daran, neue Geräte und Verbesserungen für die Shelly-Produkte zu entwickeln. Ich kann nur sagen, dass du die Website und das Forum im Auge behalten solltest, wenn es neue Produkte und Veröffentlichungen gibt. Aktuell hat Shelly sechs neue Produkte herausgebracht, die du auf der Website finden kannst.

Could be a good feature I will move this to feature request section

Shelly BLU Wall Switch 4 Legrand/Stand Alone Adapter. Smart Four-Button Bluetooth Switch Choose this variation if your frames at home are from the Shelly / Legrand (Niloe) brands or if you want to use the product standalone. Shelly BLU Wall Switch 4 is a Bluetooth smart switch that can either be mounted on your wall or used as a standalone devicе. Designed to integrate perfectly into various environments, it is compatible with standard wall switch frames from Legrand, Gira, Merten, Busch-Jaeger, and Shelly. Whether you want to control lighting, appliances, or scenes, you can customize your button actions and quickly take control of your space. Uses BLE technology (Bluetooth-operated) 2 years battery life Supports multi-click - single, double, triple, and long press (16 actions in total) Encryption (high level of security) Beacon mode - If enabled, the device will emit beacons every 8 seconds. Compact size, portability, and ease of use Full compatibility with Home Assistant and any other device that is supported by BTHome protocol (out of the box) Features Long battery life Supports multi-click Compact size, portability, and ease of use Strong encryption Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information see below Home Page Specifications Buy Shelly Blu Wallswitch 4

Shelly 1PM Gen3 Wi-Fi-operated smart switch with power metering, 1 channel 16A Shelly 1PM Gen3 is a Wi-Fi-operated smart switch for remote appliance control and precise power monitoring. Automate your home devices in less than 10 minutes, and control and monitor them from anywhere. Compact enough to fit behind most wall switches and sockets, it is retrofitted and compatible with your existing smart home system. Precise and real-time power metering with free cloud data storage for analysis and energy usage optimization New processor - ESP-Shelly-C38F chip with an increased memory of 8 MB Improved durability of terminals High security Wi-Fi range extender & Bluetooth gateway Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates No HUB required! Easy control through Shelly Smart Control app, various home automation protocols, platforms, as well as voice assistants Features Wi-Fi Connectivity: The device can connect to your home Wi-Fi network, allowing you to remotely monitor humidity and temperature data through a smartphone app or other compatible devices. Integration with Smart Home Platforms: You can integrate the Shelly i4 Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation capabilities through these platforms. Smart Switch with Power Measurement: Acts as a smart switch with the added capability of measuring power consumption, allowing you to monitor the energy usage of connected appliances. Compact Design: Designed as a small form factor switch, making it suitable for retrofitting into standard electrical wall boxes, behind power sockets, light switches, or other confined spaces. Remote Control: Enables remote control of electric appliances via a mobile phone, tablet, PC, or home automation system. Local and Cloud Control: Can function independently in a local Wi-Fi network and can be operated through cloud home automation services. Improved Processor and Memory: Upgraded with an improved processor and increased memory for enhanced performance. Remote Access: Allows remote access, control, and monitoring from any location with internet connectivity, provided the device is connected to a Wi-Fi router and the internet. Dry Contact: Allows switching on and off of lower voltage devices. Embedded Web Interface: Features an embedded web interface for monitoring, controlling, and adjusting settings. Wireless Connectivity: The device supports Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 protocols with specified indoor and outdoor range capabilities. BLE Gateway: Bridge between your Shelly BLU devices and the wider Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device. Wi-Fi Range Extender for IoT Devices: A Wi-Fi Extender is employed to expand the reach of your Wi-Fi network by receiving your current Wi-Fi signal, enhancing its strength, and transmitting the enhanced signal over a wider area. Scripting: https://shelly-api-docs.shelly.cloud/gen2/Scripts/ShellyScriptLanguageFeatures/ Wide range of integrations: The device can be integrated with 3rd party home systems, documented HTTP API, MQTT(s), WebHooks over HTTP and HTTPS, UDP Schedules: Allows complex operations to be scheduled in the predefined time window. Users can specify time windows based on date, time of day, weekdays, hours, minutes, and seconds. Virtual Components: https://shelly-api-docs.shelly.cloud/gen2/DynamicComponents/Virtual/ Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information see below Home Page Specifications Buy Shelly 1PM Gen3

Shelly i4 Gen3 Wi-Fi-operated 4-digital input controller With the ability to manage 4 digital inputs, Shelly i4 Gen3 enables you to manually activate or deactivate any created scene, synchronize actions, or execute complex trigger scenarios. Activate different devices and control the lights, shut the blinds, and activate scenes instantly from one location. Compact enough to fit behind most wall switches, the Shelly i4 Gen3 is retrofitted and takes less than 10 minutes to install under any regular 4-button switch. Multi-click - Up to 16 possible actions New processor - ESP-Shelly-C38F chip with an increased memory of 8 MB Improved durability of terminals Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates No HUB required! Easy control through Shelly Smart Control app, various home automation protocols, and platforms *Shelly Plus i4 is an input reader device (it does not contain a relay) Features Wi-Fi Connectivity: The device can connect to your home Wi-Fi network, allowing you to remotely monitor humidity and temperature data through a smartphone app or other compatible devices. Integration with Smart Home Platforms: You can integrate the Shelly i4 Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation capabilities through these platforms. Local and Cloud Control: This can function independently in a local Wi-Fi network and can be operated through cloud home automation services. Bluetooth Connectivity: Bluetooth and BLE gateway are available for inclusion purposes, which may be useful during setup. User-Friendly Interface: The device provides a user-friendly interface with a reset button for manual interactions. Improved Processor and Memory: Upgraded with an improved processor and increased memory for enhanced performance. Embedded Web Interface: Features an embedded web interface for monitoring, controlling, and adjusting settings. Wireless Connectivity: The device supports Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 protocols with specified indoor and outdoor range capabilities. BLE Gateway: Bridge between your Shelly BLU devices and the wider Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device. Wi-Fi Range Extender for IoT devices: A Wi-Fi extender is employed to expand the reach of your Wi-Fi network by receiving your current Wi-Fi signal, enhancing its strength, and transmitting the enhanced signal over a wider area. Scripting: https://shelly-api-docs.shelly.cloud/gen2/Scripts/ShellyScriptLanguageFeatures/ Wide range of integrations: The device can be integrated with 3rd party home systems, documented HTTP API, MQTT(s), WebHooks over HTTP and HTTPS, UDP Virtual Components: https://shelly-api-docs.shelly.cloud/gen2/DynamicComponents/Virtual/ Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information see below Home Page Specifications Buy Shelly i4 Gen3

Shelly Dimmer 0/1-10V PM Gen3 Wi-Fi-operated smart dimming controller with power measurement Designed to manage 0/1-10V dimming drivers, Shelly Dimmer 0/1-10V PM Gen3 offers precise dimming with power measurement. It is retrofitted and can be used with any regular switch you have at home. Supports 0-10V and 1-10V types of drivers (lights, motors, valves, etc. Wi-Fi and Bluetooth-operated Shelly Plus Add-On compatible: Supports connection with the sensor interface to measure different data (humidity, temperature, etc) One/dual button dimming mode (use with physical switches) Customizable thresholds and offsets for temperature, humidity, and light if used with Plus Add-on Power measurement: Precise monitoring of energy consumption. Information about voltage (V), current (A), and consumption (W) is displayed. Safety: Оver current/voltage/power protections Supports “Night mode”: Automatically sets the lights' brightness at a low level during the night hours Wi-Fi Range Extender & BLE Gateway Equipped with a new processor & increased flash memory - ESP Shelly No hub is required! Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants. Use it with Alexa, Home Assistant, or your preferred automation platform. Features Bluetooth: The Device complies with the Bluetooth standard and can connect with other devices to exchange data in short range. BLE Gateway: Facilitates communication between BLE and Wi-Fi-enabled devices. Wi-Fi: The Device can connect to a wireless network. Wi-Fi Range Extender: Retransmits the Wi-Fi signal and extends its reach. Scripting: Allows automation scenarios to be created through scripts. Basic Schedules: Supports weekly schedules and routines, including brightness setting, transition duration, and flip value of the dimming signal. Аdvanced Schedules: Supports detailed schedules and routines throughout the year with a broad range of time adjustments from seconds to months, including setting of brightness, transition duration, and flip value of the dimming signal. Shelly Plus Add-On compatible: The Device supports connection with the sensor interface to the Shelly Plus devices. Auto on/off timers: Enables auto on/off timer setting. Local actions: Allows creating automation scenarios within the local Wi-Fi network, including the setting of brightness, transition duration, and flip value of the dimming signal. Webhooks: Supports automation through lightweight, event-driven communication with other devices. Compatibility: Highly compatible with 3rd Party home automation systems. No need for hub: Ready for use locally or remotely via Shelly Smart Control or 3rd Party systems. Activity log: Stores detailed history of events. KVS (Key-value storage): KVS service provides a basic persistent storage of key-value pairs. Customizable thresholds and offsets for temperature, humidity, and light when/if used with Plus Add-on Safety: Оver current/voltage/power protections Power measurement: Precise monitoring of energy consumption. Information about voltage (V), current (A), and consumption (W) is displayed. Diverse driver integration: Supports 0-10V and 1-10V types of drivers (lights, motors, valves, etc.). Night Mode: Enables to set a specific brightness of input lights during nighttime. If night mode brightness < min_brightness_on_toggle, then min_brightness_on_toggle is applied Switch/Button input mode: Allows flexible input control through switches and/or buttons One button dimming control Dual button dimming control Transition duration: Controls the time for dimming from 0 to 100 % on toggle On and from 100 to 0% on toggle Off. Minimum brightness on toggle On: Brightness level (in percent) applied when there is a toggle On and current brightness is lower than 'Min brightness on toggle'. The default is 3%. Not applied when the explicit (custom) transition is defined in Schedules and Actions. Min/Max brightness: Reframes the range of the dimming signal to get more precise brightness control on the output. Button fade rate: Controls how quickly the output brightness changes while holding the button(s). The default is 3x. Button presets: State to be applied on double-push (double-click) event. The default value is 100% Virtual components: A special set of components that do not exist in the device initially and are created dynamically by the user. Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information see below Home Page Specifications Buy Shelly 0/1-10V PM Gen3

Shelly 1 Gen3 Wi-Fi-operated smart switch with dry contacts, 1 channel 16A Shelly 1 Gen3 is a smart switch with potential-free contacts. Remotely control a wide range of home appliances and office equipment from anywhere. Retrofit your standard electrical wall boxes, power sockets, light switches or other places with limited space. Dry contacts (potential-free) - option for contactor control New processor - ESP-Shelly-C38F chip with an increased memory of 8 MB Improved durability of terminals High security Wi-Fi range extender & Bluetooth gateway Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates No HUB required! Easy control through Shelly Smart Control app, various home automation protocols, platforms, as well as voice assistants Features Wi-Fi Connectivity: The device can connect to your home Wi-Fi network, allowing you to remotely monitor humidity and temperature data through a smartphone app or other compatible devices. Integration with Smart Home Platforms: You can integrate the Shelly 1 Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation capabilities through these platforms. Local and Cloud Control: This can function independently in a local Wi-Fi network and can be operated through cloud home automation services. Bluetooth Connectivity: Bluetooth and BLE gateway are available for inclusion purposes, which may be useful during setup. User-Friendly Interface: The device provides a user-friendly interface with a reset button for manual interactions. Improved Processor and Memory: Upgraded with an improved processor and increased memory for enhanced performance. Embedded Web Interface: Features an embedded web interface for monitoring, controlling, and adjusting settings. Wireless Connectivity: The device supports Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 protocols with specified indoor and outdoor range capabilities. Dry Contact: Allows switching on and off of lower voltage devices. BLE Gateway: Bridge between your Shelly BLU devices and the wider Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device. Wi-Fi Range Extender for IoT devices: A Wi-Fi extender is employed to expand the reach of your Wi-Fi network by receiving your current Wi-Fi signal, enhancing its strength, and transmitting the enhanced signal over a wider area. Scripting: https://shelly-api-docs.shelly.cloud/gen2/Scripts/ShellyScriptLanguageFeatures/ Wide range of integrations: The device can be integrated with 3rd party home systems, documented HTTP API, MQTT(s), WebHooks over HTTP and HTTPS, UDP Schedules: Allows complex operations to be scheduled in the predefined time window. Users can specify time windows based on date, time of day, weekdays, hours, minutes, and seconds. Virtual Components: https://shelly-api-docs.shelly.cloud/gen2/DynamicComponents/Virtual/ Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information see below Home Page Specifications Buy Shelly 1 Gen3

Specification wise it might, but I would wait for the Developers to complete the due diligence regarding the Matter support. I am sure there is a lot more under the hood that we all don't know of. Only thing we can do now is wait 🙂

If you missed the stream today below the link to the video

Shelly Plus RGBW PM Features A compact and versatile RGBW controller designed for effortless control of LED strips. With support for RGBW, RGB and lighting profiles, it offers unparalleled flexibility in creating the perfect atmosphere for any occasion. Its performance measurement feature provides real-time insights into energy consumption to ensure efficiency. Supports all 12V or 24VDC white (or color), RGB, RGBW LED strips Performance measurement 3 lighting profiles for easy customization Adjustable transition duration & fade speed as well as min/max brightness Independent control for RGB and white: Color brightness and white brightness can now be controlled independently with dimming up/down Night mode Overcurrent protection WLAN-Repeater & BLE-Gateway Extremely fast processor for instant response - ESP32 Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates No hub required! Easy control via the Shelly Smart Control app, most platforms and protocols, and voice assistants. Use it with Alexa, Home Assistant or your favorite automation platform. Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information, see below Home Page Specifications Buy Shelly Plus RGBW PM

to delete a scene go to the pencil from here you can then delete a scene

@Jürgen Das „alte Forum“ wurde von jemand anderem betrieben und wurde in „smarthome-forum“ umbenannt. Ich weiß im Moment nicht viel über Scripting, vielleicht weiß ein anderes Forumsmitglied die Antwort darauf. Es gibt jedoch ein API-Dokument, das Sie sich in der Zwischenzeit ansehen können

@Jorge Spanish is also added onto the list

Ich würde diese Szene entfernen und dann einen Zeitplan auf dem Gerät selbst erstellen, siehe das folgende Bild als Beispiel.

are the devices running on their own IoT VLAN? or are they on one SSID for all the devices? Why I ask this is because there are some settings that you can do on the router side that would make an IoT network more stable. Unifi networks tend to do some strange things with the wifi. What AP are you using as well?

Yes these are good settings to have for and IoT device, have you made these settings onto a separate vlan dedicated to the IoT devices?

from what I saw in the API document that option is only on the Blu Motion, Button, Door/window and the H&T. Not sure if a Dev is on the forum to confirm this

Kein Problem Wenn du Probleme hast, poste ein paar Bilder von deinen Regeln und ich bin mir sicher, dass sich eine Lösung finden lässt.