Jump to content

Shelly Pro Dimmer 2PM calibration aborted - Lights said to be non-dimmable


Recommended Posts

Hey Shelly,

just replaced 4 Dimmer2-devices on outside illumination (as they tended to loose Wifi-Connectivity) with 2 Pro Dimmer 2PM / firmware 1.3 / lan-wired. In all 4 cases there are 5 LEDs connected, each running at 7w max.

On/off Switching works fine but dimming fails, Calibration beaks on all channels of both devices at approximately 10% stating "Calibration aborted because the lights are not dimmable". Rubbish - indeed lights are dimmable - and dimming worked perfectly fine using dimmer2-devices. Config attached - any idea or simply DOA?

Dimmer 1:

{"ble":{"enable":true,"rpc":{"enable":true},"observer":{"enable":false}},"cloud":{"enable":true,"server":"shelly-80-eu.shelly.cloud:6022/jrpc"},"eth":{"enable":true,"ipv4mode":"static","ip":"192.168.2.62","netmask":"255.255.255.0","gw":"192.168.2.1","nameserver":"8.8.8.8"},"input:0":{"id":0,"name":null,"type":"button","enable":true,"invert":false},"input:1":{"id":1,"name":null,"type":"button","enable":true,"invert":false},"input:2":{"id":2,"name":null,"type":"button","enable":true,"invert":false},"input:3":{"id":3,"name":null,"type":"button","enable":true,"invert":false},"light:0":{"id":0, "name":null,"initial_state":"restore_last", "auto_on":false,"auto_on_delay":60.00, "auto_off":false,"auto_off_delay": 60.00,"transition_duration":3.00,"min_brightness_on_toggle":3.00,"night_mode":{"enable":false,"brightness":50.0,"active_between":["00:00","00:00"]},"button_fade_rate":3,"button_presets":{"button_doublepush":{"brightness":100.0}},"in_mode":"dim","current_limit":1.220,"power_limit":230,"undervoltage_limit":200,"voltage_limit":280},"light:1":{"id":1, "name":null,"initial_state":"restore_last", "auto_on":false,"auto_on_delay":60.00, "auto_off":false,"auto_off_delay": 60.00,"transition_duration":3.00,"min_brightness_on_toggle":3.00,"night_mode":{"enable":false,"brightness":50.0,"active_between":[]},"button_fade_rate":3,"button_presets":{"button_doublepush":{"brightness":100.0}},"in_mode":"dim","current_limit":1.220,"power_limit":230,"undervoltage_limit":200,"voltage_limit":280},"mqtt":{"enable":false,"server":null,"client_id":"shellyprodm2pm-08f9e0e4a798","user":null,"ssl_ca":null,"topic_prefix":"shellyprodm2pm-08f9e0e4a798","rpc_ntf":true,"status_ntf":false,"use_client_cert":false,"enable_rpc":true,"enable_control":true},"sys":{"device":{"name":null,"mac":"08F9E0E4A798","fw_id":"20240425-141834/1.3.0-ga3fdd3d","discoverable":true},"location":{"tz":"Europe/Berlin","lat":50.776600,"lon":6.160700},"debug":{"level":2,"file_level":null,"mqtt":{"enable":false},"websocket":{"enable":false},"udp":{"addr":null}},"ui_data":{},"rpc_udp":{"dst_addr":null,"listen_port":null},"sntp":{"server":"time.google.com"},"cfg_rev":10},"wifi":{"ap":{"ssid":"ShellyProDM2PM-08F9E0E4A798","is_open":true, "enable":false, "range_extender": {"enable":false}},"sta":{"ssid":null,"is_open":true, "enable":false, "ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null},"sta1":{"ssid":null,"is_open":true, "enable":false, "ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null},"roam":{"rssi_thr":-80,"interval":60}},"ws":{"enable":false,"server":null,"ssl_ca":"ca.pem"}}

Dimmer 2:

{"ble":{"enable":true,"rpc":{"enable":true},"observer":{"enable":true}},"cloud":{"enable":true,"server":"shelly-80-eu.shelly.cloud:6022/jrpc"},"eth":{"enable":true,"ipv4mode":"static","ip":"192.168.2.64","netmask":"255.255.255.0","gw":"192.168.2.1","nameserver":"192.168.2.1"},"input:0":{"id":0,"name":null,"type":"button","enable":true,"invert":false},"input:1":{"id":1,"name":null,"type":"button","enable":true,"invert":false},"input:2":{"id":2,"name":null,"type":"button","enable":true,"invert":false},"input:3":{"id":3,"name":null,"type":"button","enable":true,"invert":false},"light:0":{"id":0, "name":null,"initial_state":"restore_last", "auto_on":false,"auto_on_delay":60.00, "auto_off":false,"auto_off_delay": 60.00,"transition_duration":3.00,"min_brightness_on_toggle":3.00,"night_mode":{"enable":false,"brightness":50.0,"active_between":[]},"button_fade_rate":3,"button_presets":{"button_doublepush":{"brightness":100.0}},"in_mode":"dim","current_limit":1.220,"power_limit":230,"undervoltage_limit":200,"voltage_limit":280},"light:1":{"id":1, "name":null,"initial_state":"restore_last", "auto_on":false,"auto_on_delay":60.00, "auto_off":false,"auto_off_delay": 60.00,"transition_duration":3.00,"min_brightness_on_toggle":3.00,"night_mode":{"enable":false,"brightness":50.0,"active_between":[]},"button_fade_rate":3,"button_presets":{"button_doublepush":{"brightness":100.0}},"in_mode":"dim","current_limit":1.220,"power_limit":230,"undervoltage_limit":200,"voltage_limit":280},"mqtt":{"enable":false,"server":null,"client_id":"shellyprodm2pm-08f9e0e4bad4","user":null,"ssl_ca":null,"topic_prefix":"shellyprodm2pm-08f9e0e4bad4","rpc_ntf":true,"status_ntf":false,"use_client_cert":false,"enable_rpc":true,"enable_control":true},"script:1":{"id":1, "name":"aioshelly_ble_integration", "enable":false},"sys":{"device":{"name":null,"mac":"08F9E0E4BAD4","fw_id":"20240425-141834/1.3.0-ga3fdd3d","discoverable":true},"location":{"tz":"Europe/Berlin","lat":50.776600,"lon":6.160700},"debug":{"level":2,"file_level":null,"mqtt":{"enable":false},"websocket":{"enable":false},"udp":{"addr":null}},"ui_data":{},"rpc_udp":{"dst_addr":null,"listen_port":null},"sntp":{"server":"time.google.com"},"cfg_rev":13},"wifi":{"ap":{"ssid":"ShellyProDM2PM-08F9E0E4BAD4","is_open":true, "enable":false, "range_extender": {"enable":false}},"sta":{"ssid":null,"is_open":true, "enable":false, "ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null},"sta1":{"ssid":null,"is_open":true, "enable":false, "ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null},"roam":{"rssi_thr":-80,"interval":60}},"ws":{"enable":false,"server":null,"ssl_ca":"ca.pem"}}

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...