Gate automation

[Mirco]

Hi all,

I would like to create an automation for my gate. The info about the gate are the followings:

https://www.ipertronic.it/manuali/S-350K580M00.pdf.

I have this shelly: https://www.shellyitalia.com/shelly-plus-1pm-mini-3-gen/.

 

I made myself some tests: 

Phase on L, Neutral on N, and then to the O I plugged the wire that was in the slot number 6 (you can see on the pdf file) of the gate. Then from the SW of the shelly I go to the slot 6.

I set the ON of the switch to last 0,5 seconds. The. gate does not open. Do you guys have any suggestion?

Thanks in advances.

[thgoebel]

Imposing mains voltage to small voltage circuits may be absolutely dangerous! Please refrain from this!

You’ll need a Shelly plus 1 (which is able to be SELV certified). This Shelly may be supplied with mains voltage (pins L and N). Its dry contact has to be connected to pin 6 and 9 of door control. Propose to use an auto off timer with 1 or 2 seconds…

Edited April 8, 2024 by thgoebel

[Mirco]

Thank you for your answer, are you able to share the schema you are describing?

 

Thank you,

Mirco

[thgoebel]

You‘re welcome:

 

[Mirco]

Thank you very much for your help.

 

[Mirco]

Just wanted to thank you, It worked.

[ByteBard494F54]

You controlling the opening and closing with the App or you also going to introduce the Button or sensors to the install ?

[Mirco]

I am introducing the magnetic sensor to know if it is opened/closed. Just waiting for the right support to fix it in the garden. I integrated all in home assistant that I use as home dashboard.