Shelly Pro Dimmer 2PM

[Gullisig]

i can not calibrate the lights i get this error picture and you see the amps are not that high

Edited March 6, 2024 by Gullisig

[Olsche]

which firmware is installed? What type of load is connected? What settings have you made for Overpower?

[Gullisig]

i have the newest firmware there are 4 led lights about 35 watt i have the default overpower  the max current is 1.22 A

[Gullisig]

i had dimmer 2 on the lights and all was good

[Olsche]

provide Overpower settings please. Also

 http://IP_ProDimmerX/rpc/Shelly.GetStatus

and

 http://IP_ProDimmerX/rpc/Shelly.GetConfig

Thanks

[Gullisig]

Shelly.GetConfig.json Shelly.GetStatus.json

[Olsche]

Strange. Which type/manufacturer of LED lamps is installed? Have you tried calibrating with only 2 LEDs connected instead of the 3?

[Gullisig]

The lights are called "Qi DL Allround 360" and it worked with the old dimmer 2 .. so i don't know why it would not work with this one

i just got one channel to work, maybe i can get the other one to corporate with some patience

[Olsche]

On 3/6/2024 at 11:18 PM, Gullisig said:

just got one channel to work, maybe i can get the other one to corporate with some patience

Have you already been able to test the 2nd channel or, as suggested, just connect 2 of the 3 lights and try to calibrate?

[shaun]

Hi

I just installed the Pro Dimmer 2PM and cant calibrate either, on both channels, same error. I upgraded from the normal Dimmer 2 and everything worked fine there.

My error: unsupported load.

Firmware: 20240223-141855/1.2.2-g7c39781

I have 5 LEDs with about 11 Watts each and dimmable. 

On the pro, there not as many options as on the normal Dimmer 2, whats a bit unfortunate...

I guess, it has something to do with the firmware...

Edited March 29, 2024 by shaun