Heinz Posted June 3 Share Posted June 3 Shelly Dimmer 0/1-10V PM Gen3 Wi-Fi-operated smart dimming controller with power measurement Designed to manage 0/1-10V dimming drivers, Shelly Dimmer 0/1-10V PM Gen3 offers precise dimming with power measurement. It is retrofitted and can be used with any regular switch you have at home. Supports 0-10V and 1-10V types of drivers (lights, motors, valves, etc. Wi-Fi and Bluetooth-operated Shelly Plus Add-On compatible: Supports connection with the sensor interface to measure different data (humidity, temperature, etc) One/dual button dimming mode (use with physical switches) Customizable thresholds and offsets for temperature, humidity, and light if used with Plus Add-on Power measurement: Precise monitoring of energy consumption. Information about voltage (V), current (A), and consumption (W) is displayed. Safety: Оver current/voltage/power protections Supports “Night mode”: Automatically sets the lights' brightness at a low level during the night hours Wi-Fi Range Extender & BLE Gateway Equipped with a new processor & increased flash memory - ESP Shelly No hub is required! Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants. Use it with Alexa, Home Assistant, or your preferred automation platform. Features Bluetooth: The Device complies with the Bluetooth standard and can connect with other devices to exchange data in short range. BLE Gateway: Facilitates communication between BLE and Wi-Fi-enabled devices. Wi-Fi: The Device can connect to a wireless network. Wi-Fi Range Extender: Retransmits the Wi-Fi signal and extends its reach. Scripting: Allows automation scenarios to be created through scripts. Basic Schedules: Supports weekly schedules and routines, including brightness setting, transition duration, and flip value of the dimming signal. Аdvanced Schedules: Supports detailed schedules and routines throughout the year with a broad range of time adjustments from seconds to months, including setting of brightness, transition duration, and flip value of the dimming signal. Shelly Plus Add-On compatible: The Device supports connection with the sensor interface to the Shelly Plus devices. Auto on/off timers: Enables auto on/off timer setting. Local actions: Allows creating automation scenarios within the local Wi-Fi network, including the setting of brightness, transition duration, and flip value of the dimming signal. Webhooks: Supports automation through lightweight, event-driven communication with other devices. Compatibility: Highly compatible with 3rd Party home automation systems. No need for hub: Ready for use locally or remotely via Shelly Smart Control or 3rd Party systems. Activity log: Stores detailed history of events. KVS (Key-value storage): KVS service provides a basic persistent storage of key-value pairs. Customizable thresholds and offsets for temperature, humidity, and light when/if used with Plus Add-on Safety: Оver current/voltage/power protections Power measurement: Precise monitoring of energy consumption. Information about voltage (V), current (A), and consumption (W) is displayed. Diverse driver integration: Supports 0-10V and 1-10V types of drivers (lights, motors, valves, etc.). Night Mode: Enables to set a specific brightness of input lights during nighttime. If night mode brightness < min_brightness_on_toggle, then min_brightness_on_toggle is applied Switch/Button input mode: Allows flexible input control through switches and/or buttons One button dimming control Dual button dimming control Transition duration: Controls the time for dimming from 0 to 100 % on toggle On and from 100 to 0% on toggle Off. Minimum brightness on toggle On: Brightness level (in percent) applied when there is a toggle On and current brightness is lower than 'Min brightness on toggle'. The default is 3%. Not applied when the explicit (custom) transition is defined in Schedules and Actions. Min/Max brightness: Reframes the range of the dimming signal to get more precise brightness control on the output. Button fade rate: Controls how quickly the output brightness changes while holding the button(s). The default is 3x. Button presets: State to be applied on double-push (double-click) event. The default value is 100% Virtual components: A special set of components that do not exist in the device initially and are created dynamically by the user. Main Application Residential MDU (Multi-Dwelling Units - Apartments, condominiums, Hotels, etc. ) Light commercial ( small office building, small retail/restaurant/gas station, etc. ) Government/Municipal University/college. For more information see below Home Page Specifications Buy Shelly 0/1-10V PM Gen3 Link to comment Share on other sites More sharing options...
Recommended Posts