Jump to content
Gen2 Devices: FW Update Required / Gen2 Geräte: FW-Update erforderlich ×

Shelly Qubino Wave Shutter


Recommended Posts

  • Integrators

Shelly Qubino Wave Shutter (AU)

image.png.84e5f894bad878dff074739e20141784.png
 

Z-Wave™ shutter control with power measurement, 10 A per channel

Automate and remotely control the position of roller shutters, blinds, windows, awnings, pool covers, and other devices powered by bi-directional AC motors.


Features 
  • Control the tilt position (angle) of the Venetian blind slats
  • Supports push-buttons/momentary switches, and toggle switches
  • Power metering
  • Extremely low power consumption: < 0.3 W
  • Z-Wave frequency band: 868.4 MHz (CEPT countries)
  • Latest technology: Z-Wave 800 Series
  • Automatic set-up with SmartStart 
  • Security 2 Authenticated for the highest level of security
  • Over-the-air firmware updates
  • Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
  • *A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.

Main Application 

  • Residential
  • MDU (Multi-Dwelling Units - apartments, condominiums, hotels, etc.)
  • Light commercial (small office buildings, small retail/restaurant/gas station, etc.)
  • Government/Municipal
  • University/college

For more information see below 
Home Page    Specifications     Buy Shelly Qubino Wave Shutter
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Erstelle neue...