Jump to content
Gen2 Devices: FW Update Required / Gen2 Geräte: FW-Update erforderlich ×

Shelly Qubino Wave 1


Heinz

Recommended Posts

  • Integrators

Shelly Qubino Wave 1 (EU)

01_Wave1_webshop-new-625x625.webp.89d270d685d24a110789cab1784958a8.webp
 

Z-Wave™ smart switch, 1 channel 16 A

Control a wide range of devices and office equipment, such as electrical locks, gates, garage doors, irrigation systems, LED strips, lights, and sockets, from anywhere. The output contact is voltage-free (dry contact), allowing you to connect various power supply loads of up to 16 A to the device.


Features 
  • Dry contacts
  • Extremely low power consumption: 0.3 W.
  • Latest technology: Z-Wave 800 Series
  • Z-Wave frequency band: 868.4 MHz (CEPT countries)
  • Automatic set-up with SmartStart
  • Security 2 Authenticated for the highest level of security
  • Supports over-the-air firmware updates (OTA)
  • Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
  • *A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.

Main Application 

  • Residential
  • MDU (Multi-Dwelling Units - apartments, condominiums, hotels, etc.)
  • Light commercial (small office buildings, small retail/restaurant/gas station, etc.)
  • Government/Municipal
  • University/college

For more information see below 
Home Page     Specifications     Buy Shelly Qubino Wave 1
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Erstelle neue...