Jump to content

How to fix factory test mode (Gen1)


supportadmin

Recommended Posts

1. Symptoms

1. The devices cannot be added to the app, and cannot open device interface by IP. 
2. When user tries to open the device by IP, the response is: 
 {"rssi": 0, "power": 0.00}
 

2. Instructions how to leave the device from this factory test mode.

 
1. Power on device
2. Check the LED – should flash fast
3. Press reset button on the back shortly
4. Device will boot and will leave from this mode temporary.
5. Execute from PC or phone browser
http://192.168.33.1/settings/developer?selftest_done=1
or
http://deviceIP/settings/developer?selftest_done=1if the device is in your wi-fi network
6. Reboot the device

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...