Klaus-x Posted June 20 Share Posted June 20 Hallo Ich habe einige der Sensoren, die ich an 2-flügeligen Fenstern mit Kippfunktion nutzen möchte. Hintergrund ist, dass ein einziger Sensor zwischen den beiden Flügeln ausreichen sollte. Bei einfachen Sendern werden dann geöffnete Fenster udn einzel gekippte Fenster detektiert - aber nicht, wenn beide Fenster gekippt sind. Ich hatte gehofft, den Kippwinkel des Sensors für diesen Sonderfall nutzen zu können, da ich gehofft hatte, den Zustand "geschlossen" und "gekippit" in Home Assistant auswerten zu können, doch leider führt das "geschlossen"-Signal des Sensors dazu, dass der Winkel wieder auf Null gestezt wird 😞 Läßt sich das irgendwie umgehen? Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Members mschaeffler Posted June 22 Members Share Posted June 22 Ich habe die Sensoren oben auf dem Fensterflügel montiert; dann ist es egal wie der andere Flügel steht. https://community.shelly.cloud/topic/1004-blu-doorwindow-usecase/?do=findComment&comment=5479 Ich kenne allerdings keine Fenster bei denen man beide Flügel kippen kann und die kein Setzholz dazwischen haben. Kannst du mal ein Foto einstellen? Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Klaus-x Posted June 24 Author Share Posted June 24 Hier mal dei Situation an 2 Fenstern. Links bei beiden gekippten Fenstern mit Aqara-Sensoren Rechts ähnlicher Aufbau im geschlossenen Zustand mit Shelly BT Sensoren Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Heinz Posted July 1 Share Posted July 1 I understand your goal. To accurately detect the tilt of both windows, you need a separate sensor on each window. Currently, the setup places the magnet and Shelly sensor close together when the window is closed, indicating a closed state. If you open one window with the Shelly component, it shows an open/tilted state. However, if both windows are tilted, the magnet and Shelly sensor realign, causing the sensor to show a closed state again. This setup only indicates when either the left or right window is opened. It won't accurately show both windows in tilt mode. You need a Shelly door/window sensor for each window frame to properly detect if a window is tilted open. The smaller device is the magnet, and the larger component is the Shelly sensor. 2 Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Klaus-x Posted July 5 Author Share Posted July 5 My goal was not to detect tilting individually because I only need one indiocation that one or both windows are not closed - currently I get a false-closed if both are tilt Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.