Dimitar

Ok i am surprised, something wrong. Send me your account e-mail in a message to take a look.

If you seen export energy mean that here is 😞 sometimes inverters do that especially if you have 3 unbalanced faces. Usually inverter did't show but ... It's strange anyhow should be investigated.

About PM devices aka Shelly 1PM or Plug S. Currently the device cannot measure negative and positive consumption which mean cannot be used as you expect. For Gen2 devices this is hardware limitation and there is no way to fix that. Shelly PM mini, 1PM Mini, 1PM Gen3 and upcoming PlugS Gen3 use different power measurement chip which can report positive and negative energy with firmware 1.4. They can do the job same as EM/3EM devices especially for balcony solar systems.

Try the beta, you might found as you looking for.

If you have Balcony PV as Zendure then you can add it.

Official beta are released.

Can you give is a log, you can download it from webUI.

About the weather: Can you give is a log, you can download it from webUI.

Can you give is a log, you can download it from webUI.

Thanks, will check it because this should work if you set Paralel mode. Shelly measure continues, same way as your Grid Meter works. Maybe we do something wrong with exported energy. I see that you may use Deye. I may ask you to send me privately your Shelly account email and maybe we will ask to give us shared access temporarily to your Deye solar plant.

New firmware which solving repored bugs with Radio can be downloaded from there: https://repo.shelly.cloud/firmware/SAWD-0A1XX10EU1/beta/SAWD-0A1XX10EU1-2.0.0-beta2.zip

For better understanding will be good to give us schematics of wiring.

You need to wire MiniPM to show negative energy when there is generation from Solar to Your house. If you don't know how I can help. Then you need EM measuring total house consumption. Like that you can have as you want: Home consumption, Generated Energy and Returned energy to the grid.

Yes, number looks pretty same and correctm but I didn't understand your picture. Can you re-make it please.

Maybe take a bit more time to check the weather. is it still missing data or not ?

Will be good to tell us what is your setup. The number are similar as example: 1. Bought energy compare with Grid = 303 vs 310 2. Export = 208 vs 233 3. Generated in your case are 527 which are corresponding to Battery/Inverter = 527 vs 536 but there is something wrong because we assume that this energy are for battery charging only. Also there is no solar energy at all, looks like you only sell the energy which may not be true. A bit more data from you could help to check where is the difference and improve it.

You are right for off grid we need to have DC metering for battery charge/discharge, but we don't have such a product. In that case you just monitoring house consumption.

How much you set as tariff. GBP are not lookin correct, I agree

Not possible, if you use HA, then what else do you need?

Yes, should be Negative

We will order Sonos speaker tomorrow to integrate them.

Dear all, We are happy to release completely re-designed Shelly Wall Display UI. On top of that we added more features as: Weather and Music player for MP3 files + Radio streaming. For maximum music experience we recommend you to pair you Wall Display with an external Bluetooth speaker. THIS IS A BETA VERSION !!! You may lose stored data and may need to make a factory reset. Please report all discovered bug in comments of this thread. How to update: Use device UI and update it to Beta version. Attention: After the update the device screen may stay black for a while - DO NOT REBOOT, then you will see the new UI. Enjoy Managing display UI: There are 2 different tile sizes - Single (50% of screen height) and Double (100% of screen height). You can change card size later for all tiles except for Music and Weather. You can add to your home screen: Device tiles, Scene tiles, Group tiles, Virtual button tiles, Weather tile and Music player tile. To do that you need to swipe from top of the screen and choose "+" button. Then follow the on-screen instructions. To re-arrange card position, change the card or delete it, choose "Pen" icon, then the icon related to the action you want to perform. How to set weather: Scroll down from the top of the screen, choose a "+" and then choose Weather. Now you have the Weather tile on your home screen. This tile can not be resized. You can only have one tile of this type on your home screen. Press "..." on the right-bottom of the tile to see detailed forecast information. You can also force update the forecast if the automatic update failed for some reason. How to set and use music player: On you home screen swipe down from the top, choose "+" and then choose Music. Now you have the Music player tile on your home screen. This tile can not be resized. You can only have one tile of this type on your home screen. Press "..." on the right-bottom of the card to browse more than 55000 radio stations separated by country. You can also search for particular radio stations. If you want to search for a radio station in a specific country, add its name to the end of your query (e.g. "Magic Bulgaria" or "Magic bg"). Currently no other streaming services are supported but we will add them in the future. There is option to upload your favourite MP3 files directly. To do that you need to open Web UI by IP address. Go to Media and Drag and Drop files. At the moment you need to do that one by one. Upload multiple files at same time will be supported in the future. Please keep in mind that the more MP3 files you upload, the longer the Media Library will load. If you upload too many files, this may affect the application startup. Pair external Bluetooth speaker: Put your speaker into pairing mode. Choose Setting icon on the bottom of the screen. Click on Audio, then choose "Pair with Bluetooth speaker". Choose your speaker from the list. Set any Shelly external temperature sensor in your account: Swipe down from the top of the screen and choose the "Pen" icon. On the left-top side you will see an option to "Choose a sensor". Click on it, choose a room and then choose a device which report temperature. Note: this sensor's reading will only be displayed on the first two header tiles (Temperature and Humidity). To make the Wall Display use the data from a different sensor, you must pair a Shelly BLU H&T. Pair the device with Shelly BLU H&T: Click on "Settings" Icon on the bottom of the screen. Choose "General". Choose "Pair with external sensor". Follow the prompt holding BLU H&T button close to the screen (20-30 cm). Paired sensor will be used as main sensor for Shelly Wall display. Virtual buttons: Virtual buttons allow you to send from Shelly Wall display a HTTP requests to 3rd party systems (e.g. HA). Open Web UI by IP Click on "Components" Click on "New component" and set a Name. The new virtual component will appear in the list. On the right side you will find the Actions icon. There you can set HTTP command which want to be send when button is pushed 1, 2 or 3 times, or long pushed. Now, on the home screen of your Wall Display swipe down from top of the screen. Click "+" and then choose "Virtual components" Select the created button. Choose size of the card as you want and add it to the screen. You now have a virtual button on your home screen. Try tapping it once, twice, thrice and holding it. Zendure integration: If you have Balcony PV with Zendure you can add Zendure as a device on the page. You can discover more by yourself. Enjoy! After evaluation from you, this beta will go live for everyone.

Dear All, We have created a special PV Energy dashboard for all PV owners, providing relevant information about Generated, Exported, and Home Consumed energy. This feature is currently in the "Alpha stage," which means some numbers may not be accurate. We are looking for your suggestions and reports to improve functionality before releasing it as a stable version. Supported Features (as of June 12, 2024): Parallel, Back-up, and Balcony PV systems Generated energy from PV Consumed energy from Grid with pricing information Exported energy back to Grid (pricing information not supported) Battery charge information Net metering based on the chosen period (no option to set custom or fixed net metering period) How to set up your Shelly device for accurate measurement and data: At least two Shelly devices are required. If you have Shelly EM or 3EM set as single-phase meters, you can use one physical device connected at two different points. Parallel wiring : Parallel wiring means your Inverter and Grid are wired in parallel with the house. In this case, your Inverter adds energy from PV, and whole house consumption does not pass through it. If you have a single-phase power supply, the minimum hardware requirements are: Option 1: Shelly EM with 2xCT - one connected to wires coming from the Grid and another connected after the Inverter. Option 2: Shelly 3EM with 2xCT set in Single phase mode - one connected to wires coming from the Grid and another connected after the Inverter. You can use the 3rd wire. If you have a three-phase power supply, you need 2x Shelly 3EM, one connected before and after the grid supply and another after the inverter. Ensure that A/B/C phases on both 3EMs are connected to the same phases. Application settings: The Channel/CT connected to Grid wires MUST be set as "Grid source" and the other one MUST be set as "Generated Energy" as Appliance type in Shelly Smart Control Application. Calculation: House consumption = Grid + Generated If House consumption < 0, then = Battery Charge If Grid is negative = Exported energy Back-up/UPS wiring Back-up wiring means your Inverter passes through all energy supplied from the Grid to the House. Hardware requirements are the same as in Parallel wiring, but calculations differ. Calculation: Actual generated energy = Generated(Which measure Total House actually) - Grid If House consumption < 0, then = Battery Charge If Grid is negative = Exported energy Balcony PV Balcony PV wiring means your PV system is connected to your house through any power socket. This PV system adds energy but doesn't know how much your home consumes and cannot balance itself. Balcony PV is supported only as a single-phase power supply. Hardware options: Shelly EM with 1xCT connected after your Grid, this device must be set as Grid source as Appliance type. Any Shelly PM or Shelly PlugS or Shelly EM with 1xCT connected to your Balcony PV system. It's important that this Shelly device reports Negative energy when the PV system supplies your home with energy! This device must be set as "Generated energy" appliance type. Calculation: House consumption = Grid + Generated If House consumption < 0, then = Battery Charge If Grid is negative = Exported energy PV System Dashboard: Based on your setup, we have created a new "Alpha" dashboard where you can monitor historical information of house consumption and your PV system. Enjoy and let us know how we can improve!

@Kristian Todorov can you help there ?

In 2-3 weeks Zendure will be supported in Shelly APP same as other Shelly devices. Then you can have scene which do exactly as you want.