Jump to content

Recommended Posts

Posted

I have noticed that using a gen2 shelly as extender, to cover one part of house with poor coverage, you need to call the satellite device with 192.168.1.23:12946 and this is natural when you call it from a device that is attached to 192.168.1.0 , but if the device sending a webhook is connected to 192.168.33.0 , that is the local subnet of the extender while can access regularly all external site, cannot access 192.168.1.23:12946 unless it call it 192.168.33.91 , and the former address does not works if it is outside the local extension.
Devices have the option to have a WiFi1 and WiFi2 setting that can be connected according strenght of signal and interferences.
However this break the working on webhooks going to the satellite device since the other device should use different addresses if connected on the same network or in another one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...