Connecting a Reed Switch or Window Sensor to the Shelly 1 Gen3?

[ZeroQool]

Is it possible to connect a reed switch or window sensor to the Shelly 1 Gen3? Thanks. Kind regards

[NF1]

Yes, it is possible but more than unsafe cause you are using 240VAC (in case you want to it on the SW Input)

Please, explain what you want, otherwise my answer is really the best one.

Edited November 28 by NF1

[ZeroQool]

I would like to attach sensors to my windows, for example, as part of a security system. In the shutters, I have 230V available for use. A Wi-Fi window sensor (currently Zigbee) is too unreliable for me, so I’m looking for an alternative that I can also integrate into a smart home system, such as ioBroker.

[wooly]

so put a 1mini . if you are worried about having 200 around [but you can put a 60kΩ resistor in series to the pins of the mini, so possible risks are much lowere, or if you want a safer version get a small DC PSU and use an UNI, having all at 5 or 12V

Edited November 28 by wooly