Energy value jump

[WilbertS]

Energy sensor value increases unexpectable (over 1000kWh in one minute) every now and then. See two pics (from HA) attached showing single jump and couple of months with multiple jumps. Measured device is dishwasher consuming 10 amps or so.

I can confirm same values are reported through mqtt also.

I have only one gen3 PM device, so I don’t know is this faulty unit or bug in FW (20241011-114503/1.4.4-g6d2a586).

[ynnus]

I have the same issue with 2 of my shelly devices. Both are pm mini gen3 devices.

 

I recently reset the aenergy-value via rpc api to 0 but just a day later it jumped up by thousands of kWh, wich obviously makes no sense.

Also my Shelly shows returned active energy - but this device is on a refridgerator. There is no returning energy at this device, only consumption. 

In the power history I can see some very high spikes of over 5000 Watt for 30 seconds. Obviously this device can not handle 5000 W and even if, this should not be counted as 3 kWh consumption if only occured for 30 seconds for 3 -4 times a day.

This is what is looks when it's not bugged out:

(about 70 watts for a few hours, then idle, t

 

One of my devices is on firmware 20241011-114503/1.4.4-g6d2a586, the other on newest 20250318-152134/1.5.1-g01dd7ff.

 

[Olsche]

@ynnus is Ecomode active on your 2 devices?

[ynnus]

@Olsche No, it's not. It may have been in the past but not recently when the error is still ongoing.

[Guy Hargreaves]

Two days ago one of my Shelly PM Mini Gen 3 devices recorded a ~3.5MWh jump in energy use. Obviously rubbish data. Can I edit it out of my data history somehow? Seems related to other issues in this thread. Also FYI the firmware was upgraded recently to 20250508-110554/1.6.1-g8dbd358

Edited May 16 by Guy Hargreaves

[Dreckfresse]

Auch hier ist ein Foreneintrag zu diesem Thema

Plus PM Mini mit der FW 1.5.1
 

https://shelly-forum.com/thread/29454-plus-pm-mini-active-energy-fantasiewert-mit-fw-1-5-1-und-returned-activ-energy/?postID=301986#post301986