Connexion Shelly Dimmer 0/1-10V PM Gen3

[Mickaël VIAPIANA]

Bonjour,

Vous pouvez poser des questions sur la connexion au SHELLY DIMER GEN 3 pour l'utiliser de différentes manières.
Si vous arrivez avec une bonne fonction de SHELLY et du variateur DOOXY.
Le schéma SHELLY nécessite un module variable. 
Cependant sur mon installation, je n'ai pas ce module pour le moment, sans le SHELLY, la fonction variable.
J'ai essayé plusieurs connexions sans résultat, et j'ai également essayé de trouver des connexions similaires sur Internet, mais le DIMER GEN 3 est trop récent.

Voici un montage PAINT des deux équipements, quelqu'un pourrait-il me dire ce que je dois faire ? 

 

https://ibb.co/rfNMyKv

Merci d'avance et désolé pour le désagrément.

 

-------------------------------------------------------------

 

 

Hello,

You can ask questions about connecting the SHELLY DIMER GEN 3 to use it in different ways.
If you come up with a good function for SHELLY and the DOOXY dimmer.
The SHELLY scheme requires a variable module. 
However, on my installation, I don't have this module at the moment, without the SHELLY, the variable function.
I've tried several connections to no avail, and I've also tried to find similar connections on the Internet, but the GEN 3 DIMER is too new.

Here is a PAINT assembly of the two pieces of equipment, could someone tell me what I should do? 

https://ibb.co/rfNMyKv

Thanks in advance and sorry for the inconvenience.

 

Edited November 2 by Mickaël VIAPIANA

[thgoebel]

Sorry - I‘m not willing to open unknown links! Please insert the picture(s) directly in your post (upload image).

[Mickaël VIAPIANA]

Hello,

Sorry for the picture.
I just updated my post with the picture.

Thanks for your help

[thgoebel]

Obviously, your dimmer has no 0/1-10V input. Thus, you’re not able to control the device with the Shelly Dimmer 0/1-10V PM Gen3.

[Mickaël VIAPIANA]

Hello,

Thank you for your clear and precise answer.
Could this SHELLY be the answer to my problem? 
If this SHELLY is not suitable, would you have a SHELLY to recommend ? 

 

Thank you for your time and help

[thgoebel]

The Shelly is not the problem but the driver. Unfortunately, you didn’t specify the type and manufacturer. We recognise this scheme:

and conclude there is no terminal for control available. 

[Mickaël VIAPIANA]

Hello,

Sorry, I didn't think the model was useful if I gave the wiring diagram.

Here is the brand: Legrand
Range: Dooxie
Model: Variateur universel dooxie 2 fils 125W - livré avec support et enjoliveur Alu
Reference : 095240A

Shop-link : https://www.legrand.fr/catalogue/interrupteur/variateur-universel-dooxie-2-fils-125w-livre-avec-support-et-enjoliveur-alu

I am currently using this switch which also doubles as a dimmer without any problem.
I just wanted to connect it to a shelly

[thgoebel]

Thank you for the link to Legrand! You‘ve bought a standard dimmer without a possibility for control with other devices. No chance to connect it with a Shelly device! (Some may say it would be feasible to control it with a Shelly plus1 via the external switch input of the Legrand device. But this would be not a kind of serious control but a fiddly bricolage…)

Edited November 2 by thgoebel

[Mickaël VIAPIANA]

Hello,

Thank you for your feedback.
I'm going to buy another dimmer switch.
Do you know how I can check if the next device can control other devices? 

Thanks again for your time and help