Jump to content
🌟 NOTIFICATION/Benachrichtigung: Welcome to our New Store! - shelly.com 🌟 ×

control for sliding gate motor


DannyD

Recommended Posts

Hello 🙂

Could someone give me a hand with the cabling for connecting Shelly Plus 1 with a 24V gate motor?

The idea is to control the SS function (highlighted in yellow), which is basically a stepper. Is there also something I need to consider in the app?

Much appreciated!

plan2.jpg

plan.jpg

Link to comment
Share on other sites

1 hour ago, thgoebel said:

Please post a link to the product info (manufacturer/type) of the motor and/or to the installation instructions!

Thanks for the quick reply!

Key Automation CT102

https://keyautomation.com/media/products/images/MANUALS/580ISCT102B REV.13.PDF (English description starts on page 16, German page 50)

Edited by DannyD
Link to comment
Share on other sites

  • Members

Circuit diagram:

IMG_1717.thumb.jpeg.999b9e1adefbebcc052a11a98dd585c0.jpeg

 


If required, an additional manual pushbutton may be added.

For correct operation, step-by-step function must be configured:

IMG_1719.thumb.jpeg.82b0f67cccde71699da0808278200485.jpeg

 

Would assume that a round-robin operation is adequate: Choose alternative 0 „Normal“ or 1 „Alternate Stop“, door will open - stop - close -stop and so on with each subsequent command. 
 

Shelly must be configured with „switch“ (NOT „button“!), „toggle“ or „edge“ and an auto-off timer with 1 second runtime.

 

Edited by thgoebel
Link to comment
Share on other sites

38 minutes ago, thgoebel said:

Circuit diagram:

IMG_1717.thumb.jpeg.999b9e1adefbebcc052a11a98dd585c0.jpeg

 


If required, an additional manual pushbutton may be added.

For correct operation, step-by-step function must be configured:

IMG_1719.thumb.jpeg.82b0f67cccde71699da0808278200485.jpeg

 

Would assume that a round-robin operation is adequate: Choose alternative 0 „Normal“ or 1 „Alternate Stop“, door will open - stop - close -stop and so on with each subsequent command. 
 

Shelly must be configured with „switch“ (NOT „button“!), „toggle“ or „edge“ and an auto-off timer with 1 second runtime.

 

Amazing! Many thanks. Will try it tomorrow and will let you know how it went.

Link to comment
Share on other sites

22 hours ago, thgoebel said:

Circuit diagram:

IMG_1717.thumb.jpeg.999b9e1adefbebcc052a11a98dd585c0.jpeg

 


If required, an additional manual pushbutton may be added.

For correct operation, step-by-step function must be configured:

IMG_1719.thumb.jpeg.82b0f67cccde71699da0808278200485.jpeg

 

Would assume that a round-robin operation is adequate: Choose alternative 0 „Normal“ or 1 „Alternate Stop“, door will open - stop - close -stop and so on with each subsequent command. 
 

Shelly must be configured with „switch“ (NOT „button“!), „toggle“ or „edge“ and an auto-off timer with 1 second runtime.

 

Again, many thanks. It worked like a charm. All good now.
I really appreciate the quick help! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...