ultimate64 Posted Sunday at 14:05 Share Posted Sunday at 14:05 (edited) Finally I have the photovoltaic system up and running and finally I can use the Shelly Energy Meter properly, with 2 ammeter clamps, to monitor "CONSUMPTION and PRODUCTION" together with YOUR APP Shelly Smart Control. However, I have noticed some small BUGS in the display of Values and Graphs that should be improved and/or resolved. The problem is that depending on how you turn the AMPEROMETRIC CLAMP, therefore "K->L or L->K" (Values +/-), which monitors the PRODUCTION on the INVERTER, these BUGS change the display, IMPROVING OR/WORSENING in the various CARDS/VIEWS/VALUES. Example with Clamp with NEGATIVE VALUES (-) PHOTOVOLTAIC: -In the display of the device, the correct production in green is recognized. -In the "energy" tab if there is a difference between + consumption and - production the mathematical calculation is correct. If there is + Production and - Consumption, then it is fed into the Network the "Speedometer" becomes Green, ok, but it adds the energy produced plus that fed... and also the sum of the "unknown devices" is added so total calculation is wrong. -In the "Pv configuration" tab the graph is wrong and the values are not so right. -So if there is a "- sign" with a "+ sign" Correct Graphs and Values and others Wrong. -So if there is a "- sign" with a "- sign" Graphs and Values Assigned Example with Clamp with POSITIVE VALUES (+) PHOTOVOLTAIC: -In the display of the device the production is recognized as wrong, therefore as CONSUMPTION Purple/blue. -In the "energy" tab if there is Production and Consumption, then it is fed into the Network the "Speedometer" ALWAYS remains RED, and adds the energy produced plus that fed... and also the sum of the "unknown devices" is added so total calculation is wrong. -In the "Pv configuration" tab the right graph and correct values. -So if there is a "+ sign" with a "- sign" Correct Graphics and Values and others Wrong. -So if there is a "+ sign" with a "+ sign" Correct Graphics and Values. In the "Speedometer" there must be the possibility of configuring both the maximum consumption values and the maximum generation values separately. I hope I was clear in the concept, and I hope you fix it ... Thank you very much and have a good day.... I attach various screenshots to give you an idea.... Edited Sunday at 14:10 by ultimate64 Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.