Jump to content
🌟 NOTIFICATION/Benachrichtigung: Welcome to our New Store! - shelly.com 🌟 ×

Shelly 1PM Gen3 X2 switches off after Home Assistant core upgrade


PI1402

Recommended Posts

Hi,

I use a Shelly 1PM Gen3 X2 to measure the energy consumption of a Daikin airco. The Shelly device is integrated in Home Assistant (HA).

What I noticed is that after a core upgrade of HA, the Shelly device is switched off after HA has been upgraded and rebooted. In attached screenshot it can be seen that the current at 20:42 goes to 0 (after the upgrade). I switched it manually on again. I use also switches / energy measurement devices from other suppliers but haven't noticed the same with these. They keep the status as it was before the upgrade (which makes sense of course).

I have 2 more Shelly 1PM Gen3 X2 devices (also integrated in HA) and haven't noticed a switch off (yet) after a HA core upgrade. These are however not under a load yet.

I don't have a clue if this is an HA issue or has something to do with the Shelly device (why do the other 2 don't experience the problem)? Anyhow an annoying problem. Any clue what might be the issue? Also attached the FW info.

Regards, Pi

image.thumb.png.67f1fea0cfe4fee8b6c3153af0b087db.pngimage.thumb.png.dafee15194adad331046b65c703a432a.png

diagnostics-shelly-s1pmg3-debug-log.txt

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...