Jump to content

Would the Shelly Dimmer 0/1-10V PM Gen3 work with the Haiku L Ceiling Fan 0-10 V Module?


Recommended Posts

Hi,

I'm just wondering if the Shelly Dimmer 0/1-10V PM Gen3 would work with the below? I'm assuming I'd also need to buy the module below for the ceiling fan itself in addition to the Shelly Dimmer.

The part I was unsure about was how it could control both the fan and also the light? Or would I need two Shelly Dimmers?

 

Finally would there be a need for an RC snubber too? I am guessing this would only be needed if the fan power supply is via the Shelly Dimmer relay, or is it needed on the 0-10V part?

 

Cheers!

 

image.thumb.png.4ccce0254093a700a3abd71844bd592c.png

 

Link to comment
Share on other sites

  • Members

Most likely, the Shelly Dimmer 0/1-10V PM Gen3 will work. This is based on a theoretical perspective. A snubber would be necessary if an inductive load shall be switched with the relay of the device. For 0-10V control the snubber is obsolete.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...