AhForgetIt Posted October 7 Share Posted October 7 Hi! I would like to schedule the turning on an off of my towel heaters so I bought two Shelly 1 Gen3s. I live in the UK and I am not sure about the wiring. The box inside the bathroom (first photo) is switched by the switch on the second photo. Brown is live, blue is neutral and yellow/green is ground. Am I right in thinking that the switch is switching the live connection and I have to wire it as I did on the third photo? Thanks! Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Heinz Posted October 18 Share Posted October 18 just to be on the safe side I would use a Wago plug and not use the L on the Shelly as a bridge connection. But over all yes that would do it perfectly Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
wooly Posted October 18 Share Posted October 18 (edited) or easier: connect the power input [from switch] brown wire to I terminal, and from there a small wire to L terminal, since that input is used only to supply the shelly itself. Edited October 18 by wooly Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.