Toño Posted October 2 Share Posted October 2 Buenos Dias. He instalado satisfactoriamente un rele SHELLY 1 MINI GEN 3 en el motor de apertura de puerta de mi garaje,. Lo he colocado fisicamente dentro del propio automatismo del motor, bajo la carcasa con el contacto del rele en paralelo con el pulsador de apertura manual y utilizando la señal WIFI de mi hogar. Todo ha funcionado bien desde la aplicacion pero a partir de ese momento todos los mandos a distancia y el propio pulsador manual que ya tenía han dejado de funcionar. Entiendo que la presencia del rele inhibe y bloquea el dispositivo de control del motor (marca FORSA). Alguien mas con este problema?, puedo salvarlo alejando el rele? o de alguna otra forma. GRACIAS Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Members thgoebel Posted October 2 Members Share Posted October 2 (edited) Please configure the output with an auto-off timer (1 second). The contact of the Shelly will now open after having given the impulse, thus not blocking the manual pushbutton and the remote control. By the way: A Shelly mini 1 isn’t suitable for this application cause it is NOT SELV compliant! Use a Shelly plus 1 to protect your life and that of your relatives! Edited October 2 by thgoebel Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Toño Posted October 2 Author Share Posted October 2 Thanks THGOEBEL. I will look for it. I configured the switch as a pulse first time, but i think the trouble is the phisical presence of the Shelly close to the engine with 220 volts. When i disconectc SHELLY problem dissapears Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Members thgoebel Posted October 2 Members Share Posted October 2 (edited) Assume, you don’t want to configure an auto-off timer? Did you try to mount the Shelly in a distance from the motor (for a test only)? Only two wires have to be extended and the Shelly supplied by a power cord… Edited October 2 by thgoebel Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.