Thermostat problems / initialising

[Torstenptt]

Hello, i`ve created a Thermostat with a Shelly Plus 1 PM and a Temperatur Sensor for measuring the Temperatur and another Shelly Plus 1 PM for switching on and Off the heater. But now in the App ist showen the warning: wait untill the Temperaturen Sensor ist initialised. And when I increase ore decrease the tempeature traget value, after 2-3 Seconds, it switches back to the Prior value. 

The Temperatur Sensor ist working, reseting the devices, firmeware update, deleting and creating the Thermostate new didn't solve the Problem . Do anyone have a idea?

[Heinz]

did you add the Shelly Add-on to the Shelly plus 1PM ? 

can you send some pictures of the devices so we have a better idea of what you have going on 

[Torstenptt]

Yes I have add the  shelly addon

[Torstenptt]

The hardware shoud be ok, because I can read the temperature, Seems to be an problems with the seetings?

[Halldor Kristinsson]

I have the same problem.

 

[Halldor Kristinsson]

Here is a picture if I try to change the serpoint

[MikeB]

Having exactly the same issue on two different accounts, thermostats on both accounts were both working fine till about 3 days ago now the central heating is going crazy. Thermostat seems to lock up as soon as that message about the temperature sensor needing to initialise comes up. Deleting and reinstalling thermostats cures the problem briefly. The actual sensors are correctly reading the temperatures, but the thermostat associated with the sensors locks up. Happening to thermostats linked to shelly wall display (blu h&t), shelly H&T, and also three wire sensors linked to shelly add-ons. Keeps the linked relay locked in whatever state it was in when the thermostat locked up, causing temperature to rise (or fall) continuously well beyond the set range. Grateful to have found these posts, at least I know I'm not alone. Have spent 3 days solid trying to diagnose issue replacing sensors and relays to no effect. Problem recurs regardless of devices used.

Edited October 4 by MikeB
Spelling errors/typos

[JulienD]

Having the same issue too and I've got the impression that it's related to the dashboard. When I removed the thermostat from my dashboard, the message disappeared and it seems to work as expected.

[Torstenptt]

Here the information from the Support Team:

This is a know issue and our dev team is currently working on the fix.

As soon as we have some information regarding this issue, we will let you know!

 

Thank you for the understanding and the patience! 

 

Best Regards,

Shelly Support Team

[Heinz]

Thanks for giving the feedback to the community helps us all

[Jari]

I am using 2PM with addon that has 3 temp sensors. I would like to use this device to measure 2 different tanks and control the heaters in each of the tanks separately. With different temp settings. Now that I set up the (test) system vith lights as the indicator, it seems that the actions specified in the addon temp sensor section affect both outputs at the same time. Both lights go on when either temp sensor is at its tripping point.

How do I separate the actions? Or do I just make two different devices, one each tank?

Thanks,