jluc2808 Posted September 13 Share Posted September 13 (edited) I have added the shelly 1 plus to to the App shelly (last version) with Wifi scanner method - the 1rst time the module appears and then after some time (5 minutes) is showing with out of connection Then if suppress the module, heat the reset button for 20s, start again to include the module - the module appears, (always the Wifi scanner metho, the bluetooth method doesn't work) i could select, finish all the steps to include and affect to a room - at this time every 2/3 seconds the module alternativly appears connected / disappears - not connected (each state appears for 2 or 3 seconds) i have tried with 4 shelly 1 plus, new and with the same results what is the problem ? How could i solve it ? NB: my wifi is strong (5 level) , my box is a freebox. Edited September 13 by jluc2808 Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Heinz Posted September 24 Share Posted September 24 Can you provide the logs of the device. How many devices are on the 2.4GHz wifi? What is the signal strength of the Shelly device should should show In a -xxdBm signal. Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
jluc2808 Posted September 24 Author Share Posted September 24 only 1 device on 2.4ghz wifi, -45dBm signal Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Heinz Posted September 24 Share Posted September 24 have you tried this method Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
jluc2808 Posted September 24 Author Share Posted September 24 yes the cloud option is enable (cloud icon is setted) i find a solution to solve the on/off ==> i take the shelly plus 1 on my main home (where all the shelly are setted) , connect directly to the IP of the shelly , start update the last firmware when connected to the shelly IP ==> the go back to the remote site and add again the shelly to the wifi this have solved the ON/OFF status every 2 seconds thanks for all your help 1 Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Heinz Posted September 26 Share Posted September 26 nice thats one way to do it Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.