Pressing the button on the device for each change is annoying AF

[abcdefg]

I have more than 10 devices.

If I want to change a setting on all of them I have to take a ladder and a screwdriver and have fun pressing the buttons on all of the devices.

It is annoying AF.

[L.Sousa]

On 1.9.2024 at 18:59, abcdefg said:

I have more than 10 devices.

If I want to change a setting on all of them I have to take a ladder and a screwdriver and have fun pressing the buttons on all of the devices.

It is annoying AF.

Yes that's true....

[dewaldo]

You don't acually need to press a button to apply a change. You only need to get the Shelly BluMotion to transmit a telegram so your smartphone can run the connect procedure to apply changes.

Blind time usually is set to 60s or 30s. So you only need to be sure, that you are within bluetooth range and capture one of the events, so either the change from no motion to motion or vise versa.

And then you need to run your action inside the app in the appropriate timing.
So what I do is push the button to apply a change and then walk infront the motion sensor instead of putting a button. Or if the sensor is already triggered, be sure to stay outside the sensor range and wait for the blind time to pass by. After this the blumotion will also transmit a telegram that can be used to connect and apply changes.