Steve_DeVille Posted August 30 Share Posted August 30 Hello everyone 🙂 I want to create an automation with a BLU Motion and an RGBW PM. The following situation: A room needs to be illuminated. The room to be illuminated is generally too dark due to the lack of windows. The BLU Motion is supposed to change the brightness of the lamp in this room depending on the LUX value. With "normal" outside light, the controlled lamp should always be switched on at a low percentage. The darker the outside light, the brighter the lamp should shine. This doesn't have to work continuously, but perhaps in 4-5 steps. Example: Sunlight = lamp 0% Normal daylight = lamp 30% reduced daylight = lamp 50% Shading = 70% Darkness = 100% is it possible to implement this automation? So far I have discovered that you can switch the brightness of a lamp depending on a LUX value. But how can different brightness levels be switched depending on different LUX values? Steve Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.