Eemeli Posted August 28 Share Posted August 28 Hello! I would like to connect the contactor with a separate switch if there is a fault sometimes in the Shelly. Is the connection shown in the picture ok? Quote Link to comment Share on other sites More sharing options...
tvbshelly Posted August 28 Share Posted August 28 (edited) Is there a reason why you are not using a contactor that has a built-in on/off/auto switch? eg. https://www.findernet.com/en/worldwide/series/serie-22-installationsschutze-25-40-63-a/type/typ-22-32-installationsschutze/ Edited August 28 by tvbshelly Quote Link to comment Share on other sites More sharing options...
Eemeli Posted August 28 Author Share Posted August 28 1 hour ago, tvbshelly said: Is there a reason why you are not using a contactor that has a built-in on/off/auto switch? eg. https://www.findernet.com/en/worldwide/series/serie-22-installationsschutze-25-40-63-a/type/typ-22-32-installationsschutze/ I would like to use the old contactor, which I already have. Quote Link to comment Share on other sites More sharing options...
tvbshelly Posted August 28 Share Posted August 28 Okay, I get it. It depends on what exactly you want to achieve. Your switch only solves the problem if you cannot switch on with the Shelly. If there was a problem with the Shelly switching off, the contactor with switch would be better. This type of contactor is available precisely for such cases - when the electrical switching path via A1/A2 fails. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.