Fouad Posted August 20 Share Posted August 20 Hello all, I am a newbee to shelly and I am facing the following problem: my "installation": add shelly plug s to my local network made the ip-adress of the plug permanent tried the commands for switch on, switch off and toggle switch as http-Commands for this ip-adress. (it works) add shelly button to my local network define action 1 as http://<ShellyPlugURL>/relay/0?turn=on (klick short) define action 2 as http://<ShellyPlugURL>/relay/0?turn=toggle (klick long) define action 3 as http://<ShellyPlugURL>/relay/0?turn=off (two clicks) made sure that all actions where enabled saved all three individually the plug does not respond to the short klick and the double click. Only to the long klick I tried to identify the Error, but had no success. Here is what I did I tried the action-commands via copy paste to the browser-input: they work read the log from the button: event fired was shown on all occasions rerouted the http-commands and try to log them as a result only the event for long click showed the expected http-sequence. the other actions did not I therefore assume that something is wrong with the button has anybody an idea what could be wrong? any Idea is welcome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.