Nubie with Shelly Plus 1 with connection problems.

[Craig O]

Got my first Shelly plus 1 unit along with the  Plus 2. I have 5 Temp probes connected to the 12vdc supply. 

The wifi unit is less than 10 feet away. 

all is working just fine except for 1 problem.

Like clock work, every 57 seconds the unit stop communicating. I can set a contant ping from my PC to the unit and a second ping from the same PC to my router. 

The ping to the router will never loose a ping. While the ping to the Shelly unit stop every 57 second. this time does not fluctuate. The Its just 1 ping, and the unit is back running. It does not look like the device is rebooting. If I log into the Shelly unit directly, the same problem occurs. 

I am running ver 1.4 which was extremely difficult to upgrade since the download took just under the 57 sec. I have connected to my phone Hotspot for a check of the wifi with the same results. 

I have changed the power source from 12vdc to the 48vdc (yes, changed the terminals). 

I have formatted the device and started over. 

I cant seem to find anything on this site that has a topic like this 

Any suggestions are well welcomed.

I have attached a few pictures

 

Edited August 15 by Craig O
add pictures