Uni Plus to remotely control Topens Sliding Gate Opener - Model RK990(T)

[ALEX805]

Newbie here, but I have successfully wired up a Shelly Uni Plus to my Topens Sliding Gate Opener model RK990(T) using information from another post in the forum about using the app button to function as a Switch - Edge - with auto off after 1 second. 

However, I'm struggling to figure out how I can use the input sensors (ideally one 1 digital and the analog) to monitor the status of the gate using the gate opener's limit switches (UP = open and DN = closed) in an effective manner.  I've tried a few different wiring options, but I'm missing something. Is there a way to only use one of the digital sensors and the analog sensor, so I can save the 2nd digital sensor for another device?

Any recommendations?

 

 

Edited August 11 by ALEX805

[thgoebel]

The above shown limit switches are for internal use of the door opener. We don’t know what circuit is behind the limit switches.

Best practice is to use a separate magnet contact (reed switch), which has to be mounted at „close“ position of the door. This contact can be wired with the digital input of a Shelly UNI. 

Edited August 12 by thgoebel