Delay when turning on RGBW PM

[dang]

Hi!

I have recently bought a Shelly Plus RGBW PM to control the dimming on my under cabinet ledstrip. Since I've installed the RGBW PM, the ledstrip takes a long time (3-4seconds) to turn on. It works as it should after it starts, I can dim the leds and everything else, but the problem is that this particular ledstrip is hooked up to a driver which in turn it is hooked up to a physical button (AC wall switch). So now, every time I turn on the wall switch, I have to wait a few seconds in order for the ledstrip to turn on. 

Is there a way to improve the response time? It used to be instant, before installing the RGBW PM.

Thanks,

Dan

[thgoebel]

The Shelly plus RGBW PM has to be powered steadily. Otherwise, the described delay is inevitable.

[dang]

thank you for your quick reply. I guess I'll have to find a different solution then

[KaiHH]

And there is no way to minimize this to delay to an acceptable value? Other LED controller have a maximum delay of ~1 sec.