tcoppens Posted July 9 Posted July 9 Hi there, First timer here. I'm assembling a list of shelly devices to buy. I'm stuck on the dimmer. in my house the current hallway setup is as follows: https://pasteboard.co/8cgbOctHKWCo.png All of the Pro hardware (as far as I know) have documentation where the switch buttons are connected to the neutral line on the side of the Pro SW1. My circuit would require the SW1 to have L "live" as output. Is there a way to get around this? Thanks a lot Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish
ProsumerNL Posted November 25 Posted November 25 if it helps: I have a pulse-switch setup that is essentially a temporary contactor to the live wire which is the "push button" to activate the SW0 The wiring scheme's in the attached documentation inside the box was enough for me. you still having this issue? Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish
Heinz Posted November 25 Posted November 25 that or making use of the wiring diagrams use cases on the forum https://community.shelly.cloud/gallery/category/3-anschlussdiagramme/ Quote Translate Revert translation? English (American) Finnish French German Italian Portuguese (European) Spanish
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.