Jump to content
Gen2 Devices: FW Update Required / Gen2 Geräte: FW-Update erforderlich ×

Selly 3em and Shelly pro3


nagyabel34

Recommended Posts

Hi. I have system with 2 Shelly 3em and a Shelly pro3 device and I would like to know how can I connect these devices so if the Watt is above a level, the first 3 em will turn off and if it's above that level again, the second one will turn off as well. I would reaaly aprpreciate your help.

Link to comment
Share on other sites

  • Integrators

this can be done with the use of scenes 

create a scene pick the device and set a rule when power = over x amount then turn off device A 

it would look something like this 

image.thumb.png.b05343328c23c896532e268f9eac710b.png

also remember when you set a rule to turn off a device then you need to make a second rule to turn it back on 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...