Jump to content
Gen2 Devices: FW Update Required / Gen2 Geräte: FW-Update erforderlich ×

Momentary switches


Recommended Posts

Hi,

I have two push momentary switches connected to IN  1 & 2 of my Shelly UNI, the idea is to get them to toggle the respective relays. Testing this evening I am only able to get the switched to work as latching switch ie  when I hold switch 1 'on' relay 1 is 'on', however when I let go relay 1 turns off.

I have looked in the settings and there is no options for change the switch type   (unlike other Shelly devices), I have also tried to used Home Assistant but found that the Shelly device was turning off the relay (working against Home Assistant).

How am I able to configure IN 1 & 2 for momentary switches so it toggles the relay outputs?

Regards

James

Link to comment
Share on other sites

Thanks, this is interesting as my menus are slightly different to yours. On the App under Settings -> Button Type I have an option for Toggle Switch but that relates to the relays not the switches. I dont have a Input/Output settings option (App  downloaded today and the UNI is running the latest firmware)

Are you using a pull-up resister on the switches?

Regards

James

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...