N20net

Hello Heinz, I am using a H&T Gen 3, and a 4 Pro. I asked Shelly Support and they replied that thermostats can't be shared. I have shared the devices with my family, but there is no way to share the thermostat. I wanted other people to be able to change the set point, but it seems that isn't possible. This means that they can turn the heating on, but the thermostatic control is not active, so it just heats constantly, which isn't ideal. Thank you for the reply. I look forward to more traffic here. I'm not a fan of Facebook, which appears to be the main support method.

Thank you so much. Indeed the forum does seem to be dead. Such a shame. I just posted another question, as I had forgotten that the forum is dead! I bought the H&T Gen 3 and discovered that indeed there is no button. So I then bought some Blluetooth Buttons and did what I need to do with them. It works ok. But it would be so nice if the H&T had even just one button. Ah well. Maybe Gen 4 will! Thank you again.

Hello, Forgive me if this is a stupid question. I have converted my heating and hot water controls to be based around a Shelly 4 Pro with some H&T devices for temperature measurement. It works very nicely. I have created accounts for other family members and shared the relevant devices. This also works well. But I can't find a way to share the thermostat I created to work with the Shelly H&T. Is there a way to do this, so that the set point can be adjusted from other accounts? I suspect there is an obvious way that I have missed. Thank you for reading. (edit - I'd forgotten that this forum seems to have close to zero traffic. I don't know why. I will ask elsewhere too!)

Is the Shelly BLU H&T available for purchase in the UK? I can't find anywhere with stock.

Hello, Does the H&T Gen 3 have a button that can be used to trigger events? I want to use Shelly devices to control central heating (3 heating zones plus hot water). It would be great to be able to use the H&T units with integrated displays to turn on/off their associated zone. This is for an installation where one person wants automation and one person wants things 'old fashioned'! I know I can use a separate Shelly device for the switching but if the H&T can be the only unit needed per floor that would be perfect. Thanks for reading.