NullMind

The dotted lines are "virtual" connections, basically I will trigger the other switches via scripts/network from the 4 gang switch. And thanks 🙂

This is what I came up with after reading further and the advises here Does it look right ?

Gotcha !! .. yeah that was the original sketch to gather info, probably very wrong !!, the subsequent drawings are with better intel 🙂

Can I ask if this looks right to connect 2 wall switch (2 gang) to a single 2PM ?

I am not sure I understand, what should I change ? Connecting 1 shelly to two wall switches is described in the manual ? maybe I misunderstood what you mean ?

Hi Everyone I have a dumb switch I cant/dont need to make smart with Shelly, but just above it I will have a smart one using the shelly wall switches In order to have them both with a shelly Wall frame as on the image, is there any normal brand (like Legrand, etc) that will fit the shelly wall frame ? Thanks Carlos

Thanks This leads me to my next question, is this the most optimal way ? since we haven't routed the cables yet, or bought the hardware, now it~s the time to make the right decisions 🙂

So What you saying is, I could use a i4 on the 4 gang switch, not connected to anything but power to the shelly itself, to send commands to the other switches then on the others I could us like a shelly 1pm or shelly 2pm to connect the Line feed to the lights, and control them on the switch, or remotely from the i4 ? but for example on my diagram, the 2 gang switches 1 and 2 control the same lights, dont I need to connect them in staircase mode ? or do I just use a single shelly and connect the two touchpads ? Here is what I mean, is this how it should work ? (Image)

Hello everyone I'm trying to figure out which shelly(s) I should buy and which cables to run, this is a new kitchen, so the electricity cables can be run as necessary, and the phase can come out of any chosen switch Basically I need 4 switches 3 x dual gang 1 x Four gang I have 4 lights that I need to control: two of the 2 gang: turn on/off the downlights and mood lights the 4 gang - lights the downlights / mood lights / island lights the last button on 4 gang, on the last button I would like to create a script to turn on all the lights The other of two gang: island lights and cabinet lights In addition to the Shelly wall switches, which Shelly modules do I need for each one? and which cables to send to each one to do the "staircase switching" as well? Thank you in advance for any help. Carlos